सबै श्रेणियाँ

L टाइप औंला संयुक्त प्यानल रचनाकार

घर> प्रोडक्टहरु > कोर संगीतकार > L टाइप औंला संयुक्त प्यानल रचनाकार

प्रोडक्टहरु

L
L
एल टाइप कोर लिबास फिंगर जोइन्टिङ टाइप कोर कम्पोजर
एल टाइप कोर लिबास फिंगर जोइन्टिङ टाइप कोर कम्पोजर

एल टाइप कोर लिबास फिंगर जोइन्टिङ टाइप कोर कम्पोजर


विवरण

1

परिमिति

1चक्कु लम्बाइmm1410
2काम लिबास लम्बाइmm14000
3Area coveredmm11000*12000
4स्ट्याकर आयामmm4000x2000x2500
5भोजन गतिअधिकतम m/min35-40
6ढुवानी गर्ने यन्त्र लम्बाइmm2600mm
7समाप्त उत्पादनहरूको आउटपुटसेट/घन्टा300
8कुल शक्ति आवश्यक छKw40.75
9प्यालेटिizing आयामmm2500x1250x1100
10कन्वेयर गतिअधिकतम मि/मिनेट130
11लिबास मोटाईmm1.2-3.0
12काम लिबास चौडाईmm1250-1270
13काम लिबास लम्बाइmm 1250-1270
14फोहोर लागि कन्वेयर उपकरण
छु
15क्षेत्र कभर45
16ड्राइभिंग उपकरण
3kw सर्वो मोटर
17पीएलसी प्रणाली
ताइवान डेल्टा
18कुल  वजनKg4700
19ढुवानी मापन45


कन्फिगरेसन सूची

संआवेदन भागकन्फिगरेसनउत्पादन मोडेलब्रान्डमात्रा
1मुख्य मेसिन शरीर मुख्य मेसिन आधार च्यानल स्टील + स्टील प्लेट काट्नेकारखाना स्वयं निर्मित1
2 अगाडि ड्राइभ एकाईग्रह घटाउनेPF115-8EF1
Servo motor2.6KW-380Vसवारी1
3समाप्त कटर ड्राइभिङ उपकरणग्रह घटाउनेPF142-8EF1
Servo motor3KW-380Vसवारी1
4रियर ड्राइभ उपकरणग्रह घटाउनेPF142-8EF1
Servo motor3KW-380Vसवारी1
5मध्य ड्राइभ उपकरणग्रह घटाउने3KW-380VINVT1
Servo motorPF142-8EF1
6 दाँत काट्ने शक्तिटर्बो-वर्म रिड्यूसरNMRV130जियाङहेङ1
तीन चरण एसिन्क्रोनस मोटरYX3-132M-4 5.5KWZhongtai1
7दाँत चक्कुTCT ब्लेड सबैभन्दा तेज चक्कु
कारखाना स्वयं निर्मित1
8समाप्त उत्पादन कतरन उपकरणTCT ब्लेड सबैभन्दा तेज चक्कु
कारखाना स्वयं निर्मित1
9 नियन्त्रण प्रणाली PLC कम्प्युटर नियन्त्रक प्रोग्रामयोग्य 32 अंक आउटपुटताइवान डेल्टा1
104*4 तेर्सो प्रसारण र ठाडो उपकरणBCH श्रृंखला गियर रिड्यूसरwbo-0.75kw-11Zhongtai1
11समाप्त उत्पादन स्ट्याकरBCH श्रृंखला गियर रिड्यूसरWbo-0.75kw-11Zhongtai1

Composer Advantage

Our machine advantage compare with other factorys。
१. हाम्रो कोर संगीतकार adopts electromagnetic clutch with synchronous axis, and the front veneer move and pulls the back veneer to avoid the overlapping and veneer stucking. Other manufacturers are servo motors with up and down chain drive, through the chain to move veneer, behind the veneer push the front of the veneer drive, easy to cause veneer stucking.

13

2. Our core composer has two press wheel. The front one is against to transport gear for transporting core veneer. The behind one is against to cooling wheel for cooling the glue. Two press roller make board connection part more even. But other factory only have one pressure wheel. The transport gear is drived by electromagnetic clutch

14

15

16

17

3. Five pieces servo motor, 2pcs*3kw servo motor for cutting. 2pcs*3kw servo motor for driving. 1pc*1.1kw servo motor for waste veneer removing. All use Planetary reducer. Other factory only have 2 pieces servo motor for driving. Others are all normal motor.

18

19

4. Our machine use two bearing to fix the cutter blade. It can reduce the friction with cutter, so it is more durable. Other factory use copper block to fix blade. It need oil oftenly, and if too tight, the friction is too big. If too loose, it will cause cutting not precise.

5. We add one spring on cutter part, it can reduce noise and shock. So the cutter is more precise and durable.

20

24

6. The main drive gear is made of 40 Chromium Manganese Titanium material

7. Glue trough is made of aluminum, better Thermal conductivity than iron. Price is 5-7 times of iron.

25

26

8. Gree air condition. Quality guaranteed brand.

1 (2)

2 (3)

3 (2)

4

7

8

9

10

11

12


INQUIRY

TAGS:

सम्बन्धित उत्पादन

तातो कोटीहरू

अनलाइन