सबै श्रेणियाँ

कोर लिबास प्याचर

घर> प्रोडक्टहरु > प्लाईवुड सहायक मेसिनहरू > कोर लिबास प्याचर

प्रोडक्टहरु

pic-s
उच्च गुणस्तर स्वचालित प्लाईवुड लिबास कोर प्याचर मरम्मत मेसिन निर्माण

उच्च गुणस्तर स्वचालित प्लाईवुड लिबास कोर प्याचर मरम्मत मेसिन निर्माण


Veneer patching machine is used in plywood production process, to patch the natural veneer defect and dots that exists in veneer surface and core veneer, suitable for patching of various types veneer which in different thickness, it can improve the grade and quality of veneer.

विवरण

Veneer patching machine is used in plywood production process, to patch the natural veneer defect and dots that exists in veneer surface and core veneer, suitable for patching of various types veneer which in different thickness, it can improve the grade and quality of veneer.

In particular wood-based panels plywood production process, we need to repair natural defects board. For a long time, China's plywood production enterprise is mostly hand-repair method, even with a knife die direct repair, and can only make out shapes and blocks, and then manually filling and paper tape or hot melt adhesive filaments,the process material costs, labor costs are also time-consuming, depending on the mend after being significantly affect the appearance.

Our automatic Veneer Patching machine with a pressing mold, to remove the defects and replacement with a good core to be a good core.  The machine is suitable for a variety of wood veneer repair. It is simple,fast speed, manpower saving,to reduce production costs and improve the quality of the board.



चित्र -१


चित्र -१

चित्र -१


उत्पादन आवेदन

Optional patching size:

40x60mm
60x100mm
75x130mm
90x150mm

Mending shape:butterfly or oval
Automatic Veneer Patching Repair Machine Veneer Patcher for Plywood Making
Optional fully automatic loading,higher capacity.

Plywood core veneer patcher is repairing veneer by patching the holes and knots to improve the value of the core veneer.

Mending veneer thickness0.8-3 मिमी
Mending veneer size (butterfly model )40 × 60 मिमी60 × 100 मिमी75 × 130 मिमी90 × 150 मिमी
Mending speed(Each process takes about 3~5 seconds.)
पावरK० किलोवाटK० किलोवाट
संपीडित हावा4~6kg/cm2
Normal oil pressure16 mpa
Diameter of cylinderΦ50 मिमीΦ63 मिमीΦ80 मिमीΦ80 मिमी
समग्र आयाम1650L×1300 W×1750H mm1810L×1500W×1750H mm
लगभग वजन1300 किलो1500 किलो

Veneer patching machine can patch/ mend/ fix/ repair veneer that has holes/ defects/ scars, so the patched veneer will have a better smoothness/ flatness.

Working veneer thickness 0.6~3mm
Patching size on veneer sheet 40*60mm or 60*100mm two sizes optional;
Patching frequency 3~5s/time;
Motor power 4.25KW;
There are compress air device for veneer cutting,working air pressure 4~6kg/cm2;

The defect ponits replaced by good veneer.
Cylinder diamter 50mm (63mm);
आयाम 1650*1300*1750mm
Net weight 1550kg;

"Revolutionizing Veneer Repairs - Check Out This Incredible Machine!" Veneer Patching Machine


4ft & 8ft Veneer Punching Machine    

मोल्ड:

चित्र -१ चित्र -१


INQUIRY
सम्बन्धित उत्पादन

तातो कोटीहरू

अनलाइन